中空玻璃生產線在深加工中要注意什么?
時間:2023-11-30 來源:http://www.aabrs.cn/ 發布人:昌盛機械
中空玻璃生產線是玻璃深加工設備的一種,主要用來加工制作中空玻璃,玻璃原片切割后進入中空生產線,中空玻璃生產線主要有四段:入料段、清洗干燥段、檢查段和合片段.四段均以相同的傾角立式安放,結構緊湊、經濟實用、效率高、維護方便.
Hollow glass production line is a type of glass deep processing equipment, mainly used to process and produce hollow glass. After the glass raw material is cut, it enters the hollow production line. The hollow glass production line mainly has four sections: feeding section, cleaning and drying section, inspection section, and assembly section. All four sections are vertically placed at the same inclination angle, with a compact structure, economic practicality, high efficiency, and easy maintenance
中空玻璃生產線的清洗水路系統為循環系統,其水箱配有恒溫水加熱裝置,水溫可自動保持在合理的范圍.
The cleaning water system of the insulated glass production line is a circulating system, and its water tank is equipped with a constant temperature water heating device, which can automatically maintain the water temperature within a reasonable range
水由水泵從水箱抽出,經噴淋水管噴到玻璃表面上,清洗玻璃后流回水箱,循環使用.若水質較差,需配備水處理裝置,水經處理后進入水箱,按上述步驟循環使用.
Water is pumped out of the water tank by a water pump and sprayed onto the glass surface through a spray pipe. After cleaning the glass, it flows back to the water tank and is recycled. If the water quality is poor, a water treatment device is required. After treatment, the water enters the water tank and is recycled according to the above steps
注意事項:
Notes:
(1)中空玻璃生產線滑輪定期檢查更換
(1) Regular inspection and replacement of pulleys on the insulated glass production line
(2)設備鏈條要定期檢查防止松動和錯節的現象
(2) The equipment chain should be regularly inspected to prevent looseness and misalignment
(3)中空玻璃生產線水箱的水定期更換新水,毛刷要定期檢查更換
(3) The water in the water tank of the insulated glass production line should be regularly replaced with new water, and the brushes should be inspected and replaced regularly
(4)在中空玻璃生產線的速度調節時,要注意機器上不要有玻璃存放,以防止各個波段的速度不穩,出現玻璃挑起的情況
(4) When adjusting the speed of the insulated glass production line, it is important to note that there is no glass stored on the machine to prevent unstable speeds in various bands and the possibility of glass lifting
(5)中空玻璃生產線出廠標準為380V電壓,所在中空玻璃生產線使用時盡量使用三廂電,這會減少機器的耗電量,也能提升中空玻璃生產線的整體電器元件的使用壽命.
(5) The factory standard for the insulated glass production line is 380V voltage. When using the insulated glass production line, it is advisable to use a three box power supply, which will reduce the power consumption of the machine and improve the overall service life of the electrical components in the insulated glass production line
- 全自動丁基膠涂布機操作規程 2024/12/14
- 丁基膠涂布機在使用的常見問題 2024/12/13
- 雙組份打膠機如何調整滴膠量? 2024/12/09
- 中空玻璃生產線的磨損如何解決 2024/12/07
- 雙組份打膠機對于打膠工作完成很重要 2024/12/05
- 全自動封膠線的工業自動化設備介紹 2024/12/03
- 玻璃涂布機設備:設備存在的安全隱患 2024/11/25
- 中空玻璃加工設備:玻璃開膠的應急處理措施 2024/11/21
- 中空玻璃生產線:玻璃起霧怎么辦?昌盛為您解決! 2024/11/20
- 中空玻璃加工設備:選擇中空玻璃,創更舒適的環境 2024/11/18