Glass cutting → edge grinding → cleaning and drying → framing → filling desiccant → applying butyl adhesive → framing → laminating and pressing → sealing → curing and other processes.

一、玻璃裁切

1、 Glass cutting

玻璃裁切我們使用玻璃裁切機來完成這項工作，他的優點是準確度高，效率快并且可以切割圓形、矩形等各種形狀的小片玻璃。效率和質量要遠高于人工切割！高質量的玻璃切割可以減輕下一道工序磨邊的工作量，提高整體的工作效率。

We use a glass cutting machine to complete this task. Its advantages are high accuracy, fast efficiency, and the ability to cut small pieces of glass in various shapes such as circles and rectangles. Efficiency and quality are much higher than manual cutting! High quality glass cutting can reduce the workload of edge grinding in the next process and improve overall work efficiency.

二、清洗干燥

2、 Cleaning and drying

中空玻璃制作過程中的清洗干燥環節使用玻璃清洗機，該設備也屬于我們加工制作中空玻璃中必選的設備之一，玻璃清洗機不但能夠對玻璃進行表面的清理工作還能同時對清洗完成的玻璃進行干燥，玻璃處理完成后可直接進入下一個流程方便快捷。

The cleaning and drying process during the production of insulating glass uses a glass cleaning machine, which is also one of the necessary equipment in our processing and production of insulating glass. The glass cleaning machine can not only clean the surface of the glass, but also dry the cleaned glass at the same time. After the glass treatment is completed, it can directly enter the next process, which is convenient and fast.

三、制框

3、 Framing

制框也就是我們常說的把鋁條，根據我們中空玻璃的訂單要求進行彎折！這個流程我們要用到的設備是鋁條折彎機。這一步我們使用的設備是鋁條折彎機，他的優點是效率高，加工后的鋁條整體美觀，主要的是很少對原材料進行損耗，人工彎折會浪費大量的鋁條，即便操作熟練的工人也會出現對原材料的損耗。

Framing, also known as bending aluminum strips according to our order requirements for insulating glass, is a common practice! The equipment we need to use in this process is an aluminum bar bending machine. The equipment we use in this step is an aluminum bar bending machine, which has the advantages of high efficiency and overall aesthetic appearance of the processed aluminum bars. The main advantage is that there is little loss of raw materials, and manual bending will waste a large amount of aluminum bars. Even skilled workers may experience loss of raw materials.

四、涂布丁基膠

4、 Coating butyl adhesive

這個流程我們需要用到的設備為丁基膠涂布機，該設備能夠快速的完成整個流程，效率遠高人工，并且經過加工后的鋁條整體也非常的美觀。丁基膠也能夠較為無缺的均勻的附著在鋁條的表面。

The equipment we need for this process is a butyl adhesive coating machine, which can quickly complete the entire process with much higher efficiency and manual labor. The processed aluminum strip is also very beautiful overall. Butyl adhesive can also adhere evenly to the surface of aluminum strips without any defects.

五、上框、合片壓片

5、 Upper frame, lamination and lamination

其實這兩個步驟我們完全可以使用人工取代，也可以使用上片合片機來取代人工。

In fact, we can completely replace these two steps with manual labor, or we can use a laminating machine to replace manual labor.

六、封膠

6、 Sealing adhesive

中空玻璃的封膠工作是整個中空玻璃制作過程中重要的一個流程，我們使用的設備是中空玻璃打膠機。智能設備替代了人工涂膠大大提升效率、產品質量、美觀程度。

The sealing work of insulating glass is an important process in the entire production process of insulating glass, and the equipment we use is the insulating glass sealing machine. Intelligent devices have greatly improved efficiency, product quality, and aesthetics by replacing manual gluing.