中空玻璃加工設備玻璃清洗機的使用
時間:2023-04-06 來源:http://www.aabrs.cn/ 發布人:昌盛機械
對于玻璃清洗機而言,日常的維護和保養遠比之后的維修要重要的多。不過,維護和保養要注意的細節就比較多。
For glass cleaning machines, daily maintenance and upkeep are much more important than subsequent repairs. However, there are many details to pay attention to in maintenance and upkeep.
傳送部分的保養值得重點關注的就是要及時按照說明手冊上進行潤滑保養從而保證傳送系統的正常運轉。
The maintenance of the transmission part is worth paying special attention to, which is to promptly follow the lubrication and maintenance instructions in the manual to ensure the normal operation of the transmission system.
而水循環系統關系到清洗玻璃的品質,所以我們建議每天都要更換水箱當中的純水。每一周都要對水箱和過濾裝置進行清潔。
The water circulation system is related to the quality of cleaning glass, so we recommend replacing the pure water in the water tank every day. Clean the water tank and filtration device every week.
在清洗過程單中,可以通過水箱蓋子上面的小孔觀察噴嘴噴水的情況,如果有阻塞的情況應該立即停止,然后拆下噴嘴,在疏通過后確認噴嘴正常工作之后在進行調試安裝。
During the cleaning process, the spraying of water from the nozzle can be observed through the small hole on the water tank cover. If there is any blockage, it should be stopped immediately, and then the nozzle should be removed. After the nozzle is cleared and confirmed to be working properly, debugging and installation can be carried out.
除了檢查水循環系統,我們還要注意風路系統的定期維護,除了定期的檢查風機的運行情況,一般情況下我們一般都要隔一個月進行一次風機的清洗。
In addition to checking the water circulation system, we also need to pay attention to the regular maintenance of the air duct system. In addition to regularly checking the operation of the fan, we usually need to clean the fan every other month.
如果拆除過濾網,一定要提前關閉電源,以免發生安全事故。在日常的風路維護當中,我們一定要注意風機房的清潔,爭取做到每天都要打掃,以免風機吸入過多的灰塵。
If removing the filter screen, be sure to turn off the power in advance to avoid safety accidents. In daily air maintenance, we must pay attention to the cleanliness of the fan room and strive to clean it every day to prevent the fan from inhaling too much dust.
玻璃清洗機的水路系統的洗滌液溫度一般都要控制在四十攝氏度到五十攝氏度之間,這個溫度下的水是適宜清理玻璃表面的。
The temperature of the washing solution in the water system of the glass cleaning machine is generally controlled between 40 ° C and 50 ° C, and the water at this temperature is the most suitable for cleaning the glass surface.
感謝您的閱讀,本文的精彩內容來自:中空玻璃加工設備我們會有更多的精彩內容繼續為您呈現,詳情請點擊:http://www.aabrs.cn
Thank you for reading. The exciting content of this article comes from: Insulated glass processing equipment. We will continue to present more exciting content to you. For more details, please click: http://www.aabrs.cn
上一篇:中空玻璃生產線是如何達成玻璃的質量的?
下一篇:雙組份打膠機使用流程介紹
相關新聞 moer+
- 全自動丁基膠涂布機操作規程 2024/12/14
- 丁基膠涂布機在使用的常見問題 2024/12/13
- 雙組份打膠機如何調整滴膠量? 2024/12/09
- 中空玻璃生產線的磨損如何解決 2024/12/07
- 雙組份打膠機對于打膠工作完成很重要 2024/12/05
- 全自動封膠線的工業自動化設備介紹 2024/12/03
- 玻璃涂布機設備:設備存在的安全隱患 2024/11/25
- 中空玻璃加工設備:玻璃開膠的應急處理措施 2024/11/21
- 中空玻璃生產線:玻璃起霧怎么辦?昌盛為您解決! 2024/11/20
- 中空玻璃加工設備:選擇中空玻璃,創更舒適的環境 2024/11/18