其操作流程如下：

The operation process is as follows:

準備工作：將需要加工的中空鋁條放在工作臺上，并調整夾緊裝置保證鋁條不會移動。

Preparation: Place the hollow aluminum strip that needs to be processed on the workbench and adjust the clamping device to ensure that the aluminum strip will not move.

設定參數：根據需要加工的鋁條尺寸和彎曲角度設定折彎機的參數，包括彎曲半徑、彎曲角度、彎曲速度等。

Set parameters: Set the parameters of the bending machine according to the size and bending angle of the aluminum strip to be processed, including bending radius, bending angle, bending speed, etc.

啟動機器：按下啟動按鈕機器開始運行，將中空鋁條送入機器內部。

Start the machine: Press the start button to start the machine and feed the hollow aluminum strip into the interior of the machine.

折彎加工：機器根據設定的參數將鋁條彎曲成所需的形狀，在加工過程中需要不斷調整夾緊裝置和彎曲參數以保證加工質量。

Bending processing: The machine bends the aluminum strip into the desired shape according to the set parameters, and continuously adjusts the clamping device and bending parameters during the processing to ensure processing quality.

完成加工：當鋁條加工完成后機器會自動停止運行，將加工好的鋁條取出進行下一步加工或者組裝。

Complete processing: After the aluminum strip is processed, the machine will automatically stop running and take out the processed aluminum strip for the next processing or assembly.

本文由全自動鋁條折彎機友情奉獻.更多有關的知識請點擊: http://www.aabrs.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from the fully automatic aluminum bar bending machine. For more related knowledge, please click: http://www.aabrs.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned