雙組份打膠機是一種工業設備，主要用于自動計量混合雙組份AB膠水，并進行打膠操作。以下是關于雙組份打膠機的詳細信息：

The two-component glue machine is an industrial equipment mainly used for automatically measuring and mixing two-component AB glue, and performing glue application operations. The following is detailed information about the two-component gluing machine:

工作原理

working principle

雙組份打膠機通過兩個獨立的泵系統分別吸取A組份和B組份的膠水，在混合室內進行充分攪拌和混合后，經過灌裝機等后續設備完成打膠工作。其基本工作原理是利用壓縮空氣將膠水壓進與活塞室相連的進給管中，當活塞處于上沖程時，活塞室中填滿膠水，當活塞向下推進滴膠針頭時，膠水從針嘴壓出，滴出的膠水量由活塞下沖的距離決定，可以手工調節，也可以在軟件中控制。

The two-component gluing machine uses two independent pump systems to extract the glue of component A and component B respectively. After thorough mixing and blending in the mixing chamber, the gluing work is completed by subsequent equipment such as filling machines. The basic working principle is to use compressed air to press the glue into the feed tube connected to the piston chamber. When the piston is in the upward stroke, the piston chamber is filled with glue. When the piston pushes down the dispensing needle, the glue is pressed out from the needle mouth. The amount of glue dripped is determined by the distance of the piston's downward stroke and can be manually adjusted or controlled in software.

應用領域

application area 

雙組份打膠機廣泛應用于汽車制造、航空航天、船舶制造、電子電器、建筑裝飾等領域。它可以用于各種膠水的施膠，如環氧樹脂膠、聚氨酯膠、硅膠等。

The two-component gluing machine is widely used in fields such as automobile manufacturing, aerospace, shipbuilding, electronic appliances, and building decoration. It can be used for applying various adhesives, such as epoxy resin adhesive, polyurethane adhesive, silicone adhesive, etc.

維護周期

Maintenance cycle

對于雙組份打膠機的維護保養，以下是一些關鍵點：

For the maintenance of two-component glue machines, the following are some key points:

日常維護：每天工作結束后，應擦拭設備機身，排放油水分離器積聚的油水，檢查氣路油霧器的潤滑油情況，清除膠槍里的殘留膠水，注意壓力表讀數是否正常，并做好工作日記。

Daily maintenance: After work every day, the equipment body should be wiped, the accumulated oil and water in the oil-water separator should be discharged, the lubricating oil condition of the air path oil mist device should be checked, residual glue in the glue gun should be removed, the pressure gauge reading should be checked for normality, and a work diary should be kept.

一級維護：每周檢查機械運動部件的連接和潤滑情況，必要時添加潤滑脂；每隔15個工作日清洗一次混合器。

First level maintenance: Check the connection and lubrication of mechanical moving parts weekly, and add lubricating grease if necessary; Clean the mixer every 15 working days.

本文由雙組份打膠機為您提供，我們的網站 http://www.aabrs.cn我們將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided by a two-component glue machine on our website http://www.aabrs.cn We will provide you with wholehearted enthusiasm and welcome your visit!